How to draw this multi-roofed house?
In the “layout” step:
Add the level (free or automatic) which is to receive the roofs.
At level 1: draw the wall which separates the garage from the main house.
In the “Roof” step:
Select the level destined for the roof: for a single storey house, select Level 1 for example.
Select free roof and draw the first roof above the garage. Draw the roof at the exterior of the contour walls stopping just before the separation wall between the garage and the main house
In the right-hand panel select the type of flat roof.
Fill in the height at which the roof must start in the Height cell and indicate the dimensions of the parapet.
Select free roof and draw the second roof on the exterior of the contour walls.
In the right-hand panel, retain the classic roof and specify the height and angle.
Select the roof edge adjoining the garage roof.
In the right-hand panel, Outline, uncheck slope bottoms to install a gable.
Do the same at the other end of the roof to make a gable roof.
Select one by one, the lower ends of the roof. In the right-hand panel, Outline, determine the overhang.
And hey presto!
Please use Google Chrome to obtain the best export results.
- 2/4/16, 10:26 AM