How to design an elaborate roof?
In the automatic or free mode, all the sides are down slopes.
To build a gable, click on the slope and uncheck "down slope" in the right-hand panel.
To build a gable in a section of the roof, you need to draw in free mode, a roof gap.
Using the mouse first of all get closer to the wall, then…
Finish the distance using the arrow keys, until this message appears.
The roof overhangs: Click on the bottom of the slope and fill in the overhang in the right-hand panel
For the roof overhangs, pinion side, pull using either the mouse or the keyboard arrows.
Set the height and angle of the roof using the right-hand "Angle": roof slope in degrees.
"Height": height from the bottom of the roof
Single sloped roof:
Check the "one slope" box in the right-hand panel.
Define which side is the down slope (as well as the height and angle).
Lastly, finish with the coverings:
"Coatings" step -> menu "COVERINGS"
And hey presto!
Please use Google Chrome to obtain the best export results.
- 2/4/16, 11:00 AM